Page 33 - Catalogo Tejas Borja 2016 Ingles x

Always follow the Code of practice for installation of roofs with clay roofing tiles in
accordance with latest regulations and those applicable in each zone of application.

3
To prevent birds from entering the roof and allow ventilation, Eave ventilation comb
should be installed.

The first batten to be installed on the eaves must be 2 cm taller that the others. To
achieve this effect, a taller batten or a Eave Ventilation Comb Profile, which combines
both products, can be installed in this area. Flat 12 Starter Roof Tile can be used for

this purpose.

Flat roof tiles are installed from right to left, and from the eave to the ridge line. The first
row of roof tiles have variable overhanging, depending on the model and installation.

Flat 12 Bird stop

Starter Roof Tile grate Eaves comb profile

Ventilation roof tiles are installed in the same manner as other roof tiles, interlocking into each other
laterally and from the top. These roof tiles should be distributed along the roof surface.
4

Flat 10 Ventilation
Flat 10 Chimney Carrier Universal Ventilation Cap Flat 12 Ventilation

Edges clay accessory (left and right) should be installed overlapping the roof tiles 5

and following the direction of the tile. To complete the slope on the left it should

be placed on the roof tile or half-tile, depending on the width of the roof surface
and method of installation (straight or in staggered formation).

Flat Straight Edges Half Flat 10 Roof Tiles Half Flat 12 Roof Tiles

The batten installed on the ridge line should be attached to the Can- 6

tilevel supports. To install the battens, they must be installed to the

Cantilevel support at the required pitch and height so that the ridges
are directly supported on the roof tiles in the last row.

Soporte rastrel caballete

The Under ridge roll tape (mixed, aluminium or Roof ridge pvc vent brush) should 7

be placed on the ridge batten and fixed with clips or nails. The rolls have adhesi-
ve strips of butyl to attach to the profile of the roof tiles and waterproof joints. Fi-

nally, the Ridges and End Caps clay accessory should be installed with screws/
nails and ridge clips.

Universal Straight
Angular Hip Starter Angular 3 Ways Angular 4 Ways End Cap
Under ridge mixed roll
Angular Ridge

See more ROOF COMPONENTS on page 92 or at www.tejasborja.com

31