Page 65 - Catalogo Tejas Borja 2016 Ingles x
P. 65
Always follow the Code of practice for installation of roofs with clay roofing tiles in
accordance with latest regulations and those applicable in each zone of application.
3
To prevent birds from entering the roof and allow ventilation, Eave ventilation comb
should be installed.
The first batten to be installed on the eaves must be 2 cm taller that the others.
To achieve this effect, a taller batten or a Eave Ventilation Comb Profile, which
combines both products, can be installed in this area.
Plana Alicantina roof tiles are installed from right to left, always in staggered for-
mation and from the eave to the ridge line. The first row of roof tiles have variable
overhanging.
Bird stop
grate
Eave Ventilation Comb
4
Ventilation roof tiles are installed in the same manner as other roof tiles, interlocking into each other
laterally and from the top. These roof tiles should be distributed along the roof surface.
Plana Alicantina Plana Alicantina 130 Universal Universal
Ventilation
Chimney Carrier Chimney Ventilation Cap
Universal Angular Edges - clay accessory should be installed overlapping the roof 5
tiles and half-tiles on the right and left sides.
Universal Angular Half Plana Alicantina
Edge
Roof Tile (Left - Right)
6
The batten installed on the ridge line should be attached to the Cantilevel
supports. To install the battens, they must be installed to the Cantilevel
support at the required pitch and height so that the ridges are directly
supported on the roof tiles in the last row.
Cantilever support
The Under ridge roll tape (mixed, aluminium or Roof ridge pvc vent brush) should
7
be placed on the ridge batten and fixed with clips or nails. The rolls have adhesi-
ve strips of butyl to attach to the profile of the roof tiles and waterproof joints. Fi-
nally, the Ridges and End Caps clay accessory should be installed with screws/
nails and ridge clips.
Angular
Universal Angular Hip Starter Angular 3 Ways Angular 4 Ways
Under ridge mixed roll
Angular ridge
63
