Minimum pitch: 42% – 22,5º
Useful width: 24.5 cm
Lateral overlap: 2.2 cm
Head overlap: 6.7 cm
Weight per sq. m.: 34,2 Kg
Waterproofing: Waterproof membrane
Battens per sq. m: 3.30
Roof Tiles per pallet: 264 units. / 750 Kg. // 352 units / 1000 Kg.
Minimum order: 5 roof tiles
For fitting Flat 12 roof tiles, it will be necessary to waterproof the entire surface of the suppport for all pitches.
Water porosity: < 3% | Flatness: Maximum | Light weight: 34.2 Kg./sq.m.
Flat roof tile format that belongs to the range of products EXTREM-KER®, technically perfect achieved through a firing process in monocoture roller kiln processing tile to tile which gives the product a low porosity <3%, high dimensional stability and superior mechanical strength.
It is a flat profile roof tile with lateral and longitudinal interlocking area to assemble the parts adjacent in horizontal courses. As a absolutely flat profile, total waterproofing of the deck it is required.
Approximate values: If the roof tiles are installed on battens, the useful length must be calculated on site. Installation must comply with Code of practice for the design and fixing of roofs with clay roofing tiles for the region and Tejas Borja specifications.
(*) Total waterproof of the entire roof surface is required for any pitch. Check pitch pannel according to the roof length and the location.
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
The evaluation report ICC-ES is issued for products that meet the international and residential building codes (IBC and IRC), valuing the covering properties on the roof, fire rating and wind resistance.
When installed in compliance with the report, they are a class A roof.
The certification MIAMI-DADE is issued under government rules implementing products for construction in Miami Dade County and other dependent areas.
MIAMI-DADE conformity shows that certified products have been tested and meet building regulations (ASTM C 1167), being designed according to technical Florida Building Code High Speed hurricanes.
Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.ACEPTAR