Weight per sq. m: 25 Kg
Units per lm ridge: 2.5 Celler® 50×21 roof tiles
Units per lm edge: 2.5 Celler® 50×21 roof tiles
Max. overlap: 17.0 cm
Min. overlap: 8.0 cm
Recommended support: Metallic or Treated Wood Battens (*)
Dry installation using: Screws or nails (depending on the support)
Roof Tiles per pallet: 160 units / 420 Kg.
Minimum order: 8 roof tiles
Step roof tile with nibs on its underside, is placed in the pan position, essential for the proper drainage of water in the Celler® 50×21 roofs by dry-installed on battens or continued support. It also is equipped with a hole to secure nail or screw through the batten.
To ensure their optimal installation, Celler® 50×21 roof tiles should be installed using the Step Celler® 50×21 as a pan and should be fixed to a support previously prepared with a double batten layout.
Curved roof tiles can also be dry installed on under-tile Corrugated bitumen sheet or Fiber cement sheets.
Watch video for fitting instrutions on YouTube.
Approximate values: Installation must comply with Code of practice for the design and fixing of roofs with clay roofing tiles for the region and Tejas Borja specifications.