Page 79 - Catalogo Tejas Borja 2016 Ingles x

Always follow the Code of practice for installation of roofs with clay roofing tiles in
accordance with latest regulations and those applicable in each zone of application.

3
Curved roof tiles are installed starting with first row of tiles,
ensuring that the distance between battens is constant and
leaving a gap of 3-7cm for water to pass through on the pan roof

tiles. The curved roof tiles should overhang more than 5 cm.
The overlap of the tiles should be determined according to
the area and pitch of the roof.

Bird stop
Celler® 50x21
grate Eaves comb
Eave Closure

Use ventilation roof tiles to increase the circulation of air underneath the tiles. Ventilation roof tiles are 4
installed in accordance with the Code of practice for installation of roofs with clay roofing tiles.

Celler® 50x21 Ventilation 45x20 Ventilation 40x19 Ventilation 40x15 Ventilation

5
Edges clay accessories are installed so that they are always underneath the co-
vers that form each side, and in the same direction as the pan curved roof tile.

Universal Straight Edge Universal Curved Edge

The batten installed on the ridge line should be attached to the Cantilevel supports. To install the bat- 6

tens, they must be installed to the Cantilevel support at the required pitch and height so that the ridges

are directly supported on the roof tiles in the last row and the Under Ridge (clay accessory).

Cantilever support
Universal Under Ridge 45x20 Under Ridge

The Under ridge roll tape (mixed, aluminium or Roof ridge pvc vent brush) 7

should be placed on the ridge batten and fixed with clips or nails. The rolls have
adhesive strips of butyl to attach to the profile of the roof tiles and waterproof
joints. Finally, the Ridges and End Caps clay accessory should be installed with

screws/ nails and ridge clips.

Celler® 50x21 Hip Starter Celler® 50x21 - 3 Ways Celler® 50x21 - 4 Ways Under ridge mixed roll

Compatible with family of accessories of Circular Ridge and Cover + Ridge.

77