Multi-use Alu flashing
28 de February de 2016
Sealing and ventilation of the ridge and crests, protection against the negative influence of atmospheric conditions. The tape fulfils its ventilating function perfectly and especially designed system of holes protects from getting in rain and insects. The tape is made of lacquered aluminium resistant to ultraviolet radiation. Two strips of the butyl glue enable easy […]
Multi-use PREMIUM flashing
28 de February de 2016
Self-adhesive Flashing Tape from EPDM rubber, Aluminium mesh and Butyl adhesive on the whole band. Multi-use PREMIUM is made from rubber vulcanized and intended for use where products are exposed to extrinsic factors. Fastening system: gluing and mechanical fastening. This flashing tape can be used where a waterproof joint must be created between an object on […]
Waterproofing Flashing Bitumen Sheet
17 de May de 2017
Waterproofing Flashing Bitumen Sheet Waterproofing Flashing Bitumen Sheet it’s a flashing tape: High-Adhesive Butyl Sealing Tape Protected by a Reinforced Aluminium Film use for sealing the joints of bitumen sheets and most other common bulding materials. It is also recommended for waterproofing other critical points on the roof. Properties: It is highly adhesive to all materials. […]
Counter flashing profile
28 de February de 2016
A roofing component that completely prevents the leakage of rainwater into a roof-to-wall intersection. It is made of lacquered UV resistant aluminium and climatic changes. This profile is necessary for a proper execution of the roof joints on vertical walls, sealing the Multi-use flashing bands (PREMIUM and Alu). Easy to fix, it is screwed directly […]
Roof Valley Alu Flashing
28 de February de 2016
It is made of lacquered fully UV resistant aluminum sheet with high weather resistance. Its special transverse grinding ensures suitable unobstructed flow of water. Roof valley is an adjustable flashing element used for proper finishing of a valley in a pitched roof. It is used for reception and draining of rainwater. With three parts pre-marked, no […]
Mixed Ridge Tape
28 de February de 2016
Roll tape made of polypropylene fabric with a special UV stabilizing additive and two straps of pleated aluminum sewn with thread fleece resistant to environmental factors; coated on the underside at the edges of adhesive butyl strips. It is light and easy to install for sealing and ventilating the ridge and hip lines and their intersections. References Dimensions Box […]
Alu Ridge Tape
28 de February de 2016
Sealing and ventilation of the ridge and crests, protection against the negative influence of atmospheric conditions. The tape fulfils its ventilating function perfectly and especially designed system of holes protects from getting in rain and insects. The tape is made of lacquered aluminium resistant to ultraviolet radiation. Two strips of butyl glue enable easy and […]
TB-Roll Ridge Tape
28 de February de 2016
Ventilating and sealing tape for roof ridges. TB-Roll is made out of two pleated big wave aluminum strips, connected with a polypropylene non woven fabric with the technology of hot gluing and stitching. External edges of the aluminum strips are covered with two butyl adhesive strips in a width of 20 mm which enable easy and comfortable assembly […]
Ventilation Comb 100 mm
28 de February de 2016
Product made of high quality PP plastic, UV radiation and weather resistant. The holes at the base facilitate fastening to the battens with the use of screws and nails. The best option for ventilating eaves and valleys and let the air flow under the roof tiles. Its flexible tines adjust under any type of ceramic tiles. References Length […]
Ventilation Comb 60 mm
28 de February de 2016
Product made of high quality PP plastic, UV radiation and weather resistant. The holes at the base facilitate fastening to the battens with the use of screws and nails. The best option for ventilating eaves and valleys and let the air flow under the roof tiles. Its flexible tines adjust under any type of ceramic tiles. References Lenght […]