STEP 50/45


Length: 500 mm
Width: 205mm / 165 mm
Weight: 2,50 Kg/ut.
Units/sq.m.: 10 roof tiles (+ 10 Celler® 50x21 roof tiles)
Useful length: 350 - 400 mm
Units per ml eave line: 4 roof tiles

Weight per sq. m: 25 Kg
Units per lm ridge: 2,5 Celler® 50×21 roof tiles
Units per lm edge: 2,5 Celler® 50×21 roof tiles
Max. overlap: 17,0 cm
Min. overlap: 8,0 cm
Recommended support: Metallic or Treated Wood Battens (*)
Dry installation using: Screws or nails (depending on the support)
Roof Tiles per pallet: 160 units / 420 Kg.
Minimum order: 8 roof tiles

CURVED roof tiles

CURVED roof tiles

Step 50/45 roof tile with nibs on its underside, is placed in the pan position, essential for the proper drainage of water in the C-50.21 Celler® and C-45.20 curved roof tiles roofs by dry-installed on battens or continued support. It also is equipped with a hole to secure nail or screw through the batten.

To ensure their optimal installation, big format of curved roof tile (C-50.21 Celler® and C-45.20)  should be installed using the STEP 50/45 as a pan and should be fixed to a support previously prepared with a double batten layout.

Watch video for fitting instrutions on YouTube.

Note: STEP 50/45 curved roof tile is considered an accessory. Therefore is included in AENOR certificates of a main roof tile (see accessories).

Approximate values: Installation must comply with Code of practice for the design and fixing of roofs with clay roofing tiles for the region and Tejas Borja specifications.

Note: Step 50/45 roof tile is considered decorative accessory used to complement the roof. Therefore is included in AENOR certificates of the C-50.21 Celler® roof tile (see accessories).

Quality approvals (downloads)

Details BorjaCAD

Tejas Borja - All rights reserved © 2024
Legal Advice | Cookies Policy | Privacy Policy | Site Map
close slider