TB-4®
Characteristics
Length: 442 mm
Width: 258 mm
Weight: 3,40 kg/roof tile
Units/sq.m.: 12,8 roof tiles
Useful length: 370 mm
Units per ml eave line: 5 roof tiles
Minimum pitch: 30% – 17º (*)
Useful width: 205 mm
Lateral overlap: 5,5 cm
Head overlap: 6,9 cm
Weight per sq. m.: 44 kg
Waterproofing: Breathable membrane
Battens per sq. m: 2,7
Roof Tiles per pallet: 240 units. / 835 kg
Roof Tiles per pallet for container: 180 units / 630 kg // 240 units. / 835 kg
Minimum order: 6 roof tiles
S-INTERLOCKING roof tiles
TB-4® roof tile is an exclusive one piece high profile S-interlocking roof tile design that combines the curved profile as a cover-pan result (curved roof tile effect) patented as waterproof assembly in vertical rows and horizontal courses.
The effect of S-interlocking TB-4® roof tile on deck is 50 units per sq.m. curved roof tiles, with the installation of just over 12 tiles.
Fits small deviations both false angle section as rounded decks without cuts, thanks to its lateral interlocking area.
Approximate values: If the roof tiles are installed on battens, the useful length must be calculated on site. A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to UNE – EN 1024.
Type: Double lateral overlapping and double Lengthinal overlapping. Installation must comply with Code of practice for the design and fixing of roofs with clay roofing tiles for the region and Tejas Borja specifications.
(*) Check pitch pannel according to the roof length and the geographical area.
Quality approvals (downloads)
CE
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
Applicable to finishings:
Vilaterra®
Fosca
Red
AENOR
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
Applicable to finishings:
Vilaterra®
Fosca
Red
MIAMI-DADE
The certification MIAMI-DADE is issued under government rules implementing products for construction in Miami Dade County and other dependent areas.
MIAMI-DADE conformity shows that certified products have been tested and meet building regulations (ASTM C 1167), being designed according to technical Florida Building Code High Speed hurricanes.
Applicable to finishings:
Vilaterra®
Fosca