FLAT-10
Characteristics
Length: 475 mm
Width: 285 mm
Weight: 3,5 Kg./rooftile
Units/sq.m.: 10,20 units
Useful length: (Batten distance) VARIABLE 365 - 400 mm
Units per ml eave line: 4 units
Minimum pitch recommended: 30% – 17º (*)
Useful width: 245 mm
Pallet info: 252 uts. / 892 Kg. 336 uts. / 1.185 Kg.
Minimum order: 5 roof tiles
FLAT roof tiles
FLAT-10 is a new generation of flat tiles now lighter and with greater definition. Its new deeper joins make this format the perfect choice for all kinds of projects. They can be used on any of the 5 continents in both sloping roofs and facades. Combined with BorjaJet finishes they give a singular character to any architectural design.
- Perfect, deep fit.
- Large format – 10 units per sq. m.
- Exclusive finishes BorjaJET.
- Posibility of placement both staggered as continuous joint*.
- Lightweight.
The certified characteristics for the NF Terracotta tiles are compliant with the requirements of the NF EN 1304 standard: Structural faults, the geometric characteristics , resistance to flexural strength , impermeability (class 1), frost resistance according to the NF EN 539-2 standard for all products made with red mixture. AFNOR Certification: 11 rue Francis de Pressensé // 93571 LA PLAINE SAINT-DENIS CEDEX //www.marque-nf.com
Approximate values: If the roof tiles are installed on battens, the useful length must be calculated on site. A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to UNE-EN 1024.
(*) In zone 1 (protected area), arranged in staggered formation with waterproof laminate and batten distance of 365 mm on a skirt of up to 6.5 m. Check pitch pannel according to the roof length and the geographical area according to UNE-EN 136020. In case of continuous joint fitting, waterproofing of the support is necessary in all cases.
Quality approvals (downloads)
CE
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
Applicable to finishings:
Graphite
Chocolate
Natural Black
Mid Grey
Leon Matte
Red
Moss Red
Nepal Orange
Paris Ocre
Ibiza Pink
Sidney Graphite
Toronto Oak
Weathered Cedar
Tokyo Copper
AENOR
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
Applicable to finishings:
Nepal Orange
Sidney Graphite
Tokyo Copper
Ibiza Pink
Toronto Oak
Leon Matte
Mid Grey
Graphite
Chocolate
Red
Moss Red
Paris Ocre
AFNOR
The certified characteristics for the NF Terracotta tiles are compliant with the requirements of the NF EN 1304 standard: Structural faults, the geometric characteristics , resistance to flexural strength , impermeability (class 1), frost resistance according to the NF EN 539-2 standard for all products made with red mixture.
AFNOR Certification: 11 rue Francis de Pressensé // 93571 LA PLAINE SAINT-DENIS CEDEX // www.marque-nf.com
AFNOR certification ensures conformity with the requirements of the French standard applicable to each product, demonstrates compliance with the requirements of the customers as well as the applicable regulations where applicable.
AFNOR certified fired clay tiles and special pieces are suitable for roof covering and vertical wall cladding in the French market.
Applicable to finishings:
Nepal Orange
Sidney Graphite
Tokyo Copper
Ibiza Pink
Toronto Oak
Leon Matte
Mid Grey
Graphite
Chocolate
Red
Moss Red
Paris Ocre
MIAMI-DADE
The certification MIAMI-DADE is issued under government rules implementing products for construction in Miami Dade County and other dependent areas.
MIAMI-DADE conformity shows that certified products have been tested and meet building regulations (ASTM C 1167), being designed according to technical Florida Building Code High Speed hurricanes.
Applicable to finishings:
ICC
The evaluation report ICC-ES is issued for products that meet the international and residential building codes (IBC and IRC), valuing the covering properties on the roof, fire rating and wind resistance.
When installed in compliance with the report, they are a class A roof.
Applicable to finishings:
KOMO
KOMO Quality Mark for the building industry
The KOMO Quality Mark is a guarantee of quality objectively and repeatedly assessed by an independent expert party (certification institute).
The KOMO certification is an international quality standard that provides guarantees for both the supply and demand sides of the building industry. It is a highly trusted quality mark that contributes to quality and safety and declares fitness for use through third party control.
Products with KOMO certificate distinguish themselves with their quality objectively tested by independent experts.
Applicable to finishings:
SKG-IKOB
SKG-IKOB is the Dutch certification body for the building and construction industry.
An SKG-IKOB certified product demonstrates quality and provides independent and external assurance that your product meets the agreed requirements.
A product certificate is awarded after positive results in random checks of the product, the production process, the quality system and series production.
An assessment guide (BRL) is a standardised document that SKG-IKOB uses to assess a specific product or process. The BRL includes not only the applicable legal requirements and (performance) requirements of the Construction Decree, but also the technical and aesthetic requirements set by market participants.
Applicable to finishings: