C-50.21 Celler® (BorjaBLANC)
Characteristics
Length: 500 mm
Width: 210mm / 170 mm
Weight: 2,40 kg
Units/sq.m.: 18 tejas
Units per ml eave line: 8 tejas
Weight per sq. m.: 43 Kg
Units per lm ridge: 2,5 tejas
Units per lm edge: 2,5 tejas
Max. overlap: 19,0 cm
Min. overlap: 8,0 cm
Recommended support: Metallic or Treated Wood Battens (*) / Under-tile roof sheet
Dry installation using: Curved roof tile fixing clip
Roof Tiles per pallet (Nature): 250 units / 620 kg
Roof Tiles per pallet (Centenaria®): 225 units / 570 kg
Roof Tiles per pallet (Blanca Jaspeada): 225 units / 576 kg
Minimum order: 9 roof tiles (centenaria)/10 roof tiles (nature)
CURVED roof tiles
THE VALUE OF TRADITION
Curved roof tile are the most widely-used roof tile format.
Curved roof tile with smooth curvature profile of 50 cm. in length and 21 cm. wide, which forms a gutter profile roof; its design allows different overlap measures between the parts. The edges tend to be convergent, resulting a wide end and another narrow to facilitate the assembly of pans and covers with the same format.
To ensure their optimal installation, C-50.21 Celler® roof tiles should be installed using the Step 50/45 as a pan and should be fixed to a support previously prepared with a double batten layout.
Curved roof tiles can also be dry installed on under-tile Corrugated bitumen sheet or Fiber cement sheets.
Watch video for fitting instrutions on YouTube.
Also available in BorjaCLASS : Manufacturing using high-quality, very fine, red sintered clay. Very low absortion and extremely strong.
Valores aproximados: Se deberá instalar cumpliendo la norma UNE – 136020 de diseño y montaje de cubiertas con tejas cerámicas y las especificaciones de Tejas Borja.
(*) Instalación en seco idónea con la teja curva C-50.21 Celler® y la Talón 50/45.
Quality approvals (downloads)
CE
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
Applicable to finishings:
Jasp. White
AENOR
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
Applicable to finishings: